Tech Talk

Here you can find various technical articles written by our Tech Team for the Berger Bulletin. To subscribe to the Berger Bulletin, click here.


Reloading Bench Tools: Dial Indicators

In this issue we discuss dial indicators. We demonstrate the different styles of dial indicators and then offer detailed information on how to use and maintain your dial indicator. more…


Reloading Bench Tools: The Micrometer

In this issue we discuss the micrometer. We tell the difference between inside and outside micrometers and then give you detailed information on how to use and maintain your micrometer. more…


Tools of Accuracy: The Chronograph

In this issue we discuss the chronograph, it’s uses, and how to fit one in your budget. Many reloaders are not aware of the usefulness of the chronograph and how to use the information that it gives them during their load development. more…


Setting Up Your Loads For Optimum Accuracy

In this issue, we are going to cover a subject that is asked by a lot of new reloaders. We will show you how to set up your loads for optimum accuracy, even if you are using a long bullet jump from a magazine. more…


VLD – Making it Shoot

Eric Stecker, Berger Bullets President and Master Bulletsmith, gives you a brief overview of the VLD bullet design and then goes into detail on how to get the VLD to shoot in YOUR rifle. more…


Official Moly Coating Process

In this issue we discuss the Official Moly Coating Process that Berger used when they Moly Coated bullets. We let you know all the tools and materials you will need and give you a step by step guide. more…


OUR BULLET LINES